Manitowoc SR1801W Dokumentacja Pobierz pdf (Strona 34)

100

101

34 Part Number 80-1479-3 7/10

PARTS REMOVAL FOR CLEANING/SANITIZING

Single Evaporator Ice Machines

A. Remove the water curtain

• Gently flex the curtain in the center and remove it

from the right side.

• Slide the left pin out.

B. Remove the ice thickness probe

• Compress the hinge pin on the top of the ice

thickness probe.

• Pivot the ice thickness probe to disengage one pin

then the other. The ice thickness probe can be

cleaned at this point without complete removal. If

complete removal is desired, disconnect the ice

thickness control wiring from the control board.

C. Remove the water trough

• Depress tabs on right and left side of the water

trough.

• Allow front of water trough to drop as you pull

forward to disengage the rear pins.

NOTE: Proceed to page 37, Step 7.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 299 300

Komentarze do niniejszej Instrukcji

Brak uwag

Manitowoc SR1801W Dokumentacja Strona 34

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kostkarki do lodu Manitowoc SR1801W